Roofing cost calculator. estimate material and labor costs for asphalt shingles, metal, tile, and wood shake roofing by roof size and pitch.
Enter roof footprint, pitch, and material type.
Roofing is typically the most expensive exterior project on a house, and material choice drives most of the cost difference. This calculator estimates total project cost — materials and labor — based on your roof dimensions, pitch, and chosen material. It accounts for the pitch multiplier (steeper roofs cost more per square due to safety requirements and slower installation) and regional labor rate variations.
For a typical 2,000 sq ft residential roof: asphalt shingles $6,000–$12,000 installed, architectural shingles $8,000–$15,000, standing seam metal $14,000–$30,000, clay tile $20,000–$40,000. These ranges reflect material quality tiers and regional labor rates. Enter your roof dimensions above for a more specific estimate.
3-tab asphalt shingles are the most economical at $80–$100 per square (100 sq ft) for materials. Architectural shingles run $100–$150 per square. The cost gap narrows when you factor in lifespan — architectural shingles last 30+ years vs. 20 for 3-tab, making the per-year cost similar.
Roofing cost estimation helps you budget realistically and compare contractor bids. The material cost is verifiable — shingle bundles and metal panels have published retail prices. Labor is where quotes vary most. Get 3 bids minimum, verify contractor licensing and insurance, and compare apples-to-apples: same material spec, same underlayment, same warranty terms. This calculator gives you the baseline material cost so you can evaluate what contractors are adding for labor, overhead, and margin.