Paver Calculator
Paver Patio Calculator
paver patio calculator. Paver count, base gravel, sand, and edge restraint for backyard patios.
The Short Answer: A 12x16 paver patio needs about 864 standard 4x8 pavers (4.5/sq ft), 1.2 cubic yards of base gravel, and 0.15 cubic yards of leveling sand. Add polymeric sand for joints — 1 bag per 30-60 sq ft.
Paver Patio Planning Guide
A paver patio offers the beauty of natural stone or brick with the practical advantage of being repairable -- individual pavers can be lifted and reset if settling occurs, without tearing out the whole surface. The material cost is higher than poured concrete ($6-15/sq ft for pavers vs $4-8 for concrete) but the result is more attractive and more flexible.
The base preparation is the same as any hardscape: excavate 8-10 inches below finished grade, install 6 inches of compacted crushed stone base, 1 inch of leveling sand, then the pavers. Edge restraint along the perimeter keeps pavers from shifting. Finish with polymeric sand swept into the joints.
The Bottom Line
Free paver patio calculator. Paver count, base gravel, sand, and edge restraint for backyard patios. Measure your project area carefully, add your waste factor, and use this calculator to get the material quantity before heading to the supply yard. Accurate estimates save money on bulk delivery charges and prevent mid-project shortages.